Bulk Density Tester (Volumeter) - ULBD/01
Three Method to measure Bulk Density.

Method 1: Measurement in volumeter.
Method 2: Measurement in a graduated cylinder.
Method 3: Measurement in vessel.
The bulk density of a powder is the ratio of the mass of an untapped powder sample and its volume including the contribution of the inter-particulate void volume. Hence, the bulk density depends on both the density of powder particles and the spatial arrangement of particles in the powder bed. The bulk density is expressed in grams per mL (g/mL) although the international unit is kilograms per cubic meter ( 1g/mL = 1000 kg/m3) because the measurements are made using cylinders. It may also be expressed in grams per cubic centimeter (g/cm3) powder are dependent upon the preparation, treatment, and storage of the sample.

  • Complies with European pharmacopeia and USP.

  • ASTM compliance (Optional).

  • Measures Powder, Granules & Similar product Bulk Density.

  • Easy calculation of Bulk Density in terms of m/V0.
  • Standard Accessories:

  • Bulk Density Sample receiving Cup - Cylindrical.

  • Bulk Density Sample receiving Cup - Cubical (Square).

  • 1mm Sieve.

  • Spring loaded Spatula in built within unit.

  • Cleaning Brush.
  • Copyright © 2013 UNIVERSAL LAB All Rights Reserved
    Shop No. 12, Malad Nilkanth Co-op Hsg. Soc., Ramchandra Lane Extn., Near Movie Time Theatre, Malad (W), Mumbai – 400 064 India.
    Cell: +07738 777296 | Email:
    a INHEAD site